Chapter 2 - Features set
User Manual
R5000 series - Web GUI
5
2.1.
Introduction
Web interface is a friendly management tool of R5000 unit. Using Web interface,
you can easily:
Monitor device interfaces statistics
Monitor radio link statistics
View and change device configuration
Access the graphical antenna alignment tool
Run wireless link throughput tests
Perform device maintenance and support
Access the Spectrum Analyzer tool
Access the system log
Monitor DFS operation
2.2.
R5000 unit access
When you power on the unit, WANFleX OS starts automatically and Web
management is enabled by default so, in order to access the unit via Web browser
(start the graphical user interface), type in the address bar: http://<unit IP address>.
NOTE
By default (since v1.90.0), the access to the device is available through svi1 interface at
the IP address 10.10.10.1/24 (for further details about SVI interface see section 2.4.2 -
Network settings).
Make sure you have network connectivity to the unit.
NOTE
The system allows concurrent login sessions via Web interface.
On the login page, you can type any username and any password and click Login:
