User Manual
3
Revision 1.1
2019-12-17
Getting started with the XDPL8210 reference board using .dp Vision
software
Getting started
2
Getting started
Attention:
The instructions in this manual work without V AC connection.
Attention:
Before you connect the reference board to the mains, pay careful attention to the safety hints in
the recent “REF-XDPL8210-U35W Engineering report Vx.x”. Incorrect use of the reference board
could be dangerous, possibly life-threatening.
2.1
Hardware connection
Connect the .dp Interface Gen2 to a notebook/PC with the USB cable.
Figure 1
Connection between .dp Interface Gen2 and notebook
Note:
Sometimes the detection of the .dp Interface Gen2 fails on USB3.0 ports. Therefore the use of a
USB2.0 port might be necessary (which can be provided by an external USB2.0 hub if the machine
only offers USB3.0 ports).
USB
cable to
notebook