Technical Reference Manual
002-29852 Rev. *B
19.5.1.18.12 PASS_SAR_CH_ENABLE
Description:
Enable register
Address:
0x40900838
Offset:
0x38
Retention:
Retained
IsDeepSleep:
No
Comment:
Default:
0x0
Bit-field Table
Bits
7
6
5
4
3
2
1
0
Name
None [7:1]
CHAN_EN
[0:0]
Bits
15
14
13
12
11
10
9
8
Name
None [15:8]
Bits
23
22
21
20
19
18
17
16
Name
None [23:16]
Bits
31
30
29
28
27
26
25
24
Name
None [31:24]
Bit-fields
Bits Name
SW
HW
Default or
Enum
Description
0
CHAN_EN
RW
R
0
Channel enable.
- 0: the corresponding channel is disabled.
Corresponding trigger will be reset immediately.
- 1: the corresponding channel is enabled.
Note: To disable a group either stop the trigger first or
begin with disabling the lowest channel first. To enable
a group either start with enabling the last channel first
and the first channel last, or start the trigger after all
channels are enabled. If these rules are not followed
the result is undefined.
1122
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers