Infineon TLE9563-3QX, Manual

Page: 1 / 22

User manual Please read the Important Notice and Warnings at the end of this document V 1.0
www.infineon.com page 1 of 22 2020-06-23
AppNote Number
BLDC Shield TLE9563-3QX
About this document
Scope and purpose
This user manual describes the BLDC shield with the TLE9563-3QX. This document provides detailed
information on the board’s content, layout and use. It should be used in conjunction with the TLE9563-3QX
datasheet, which contains full technical details on the device specification and operation.
Intended audience
This document is intended for users who develop applications with the TLE956x family.
Table of contents
About this document ....................................................................................................................... 1
Table of contents ............................................................................................................................ 1
1 Introduction .......................................................................................................................... 1
2 Hardware description ............................................................................................................. 3
2.1 Hardware ................................................................................................................................................. 3
2.2 Schematic ................................................................................................................................................ 8
2.3 Layout .................................................................................................................................................... 12
2.4 Bill of Material ........................................................................................................................................ 14
3 Start and uIO stick programmation ......................................................................................... 15
3.1 Download the Graphic User Interface for the uIO stick ....................................................................... 15
3.2 Configuration Wizard for TLE9563-3QX ................................................................................................ 15
4 Config Wizard - Control tabs ................................................................................................... 16
4.1 SBC ......................................................................................................................................................... 16
4.2 Bridge Driver .......................................................................................................................................... 19
Revision history............................................................................................................................. 21
1 Introduction
The TLE9653-3QX evaluation board is intended to provide a simple and easy-to-use tool for getting familiar
with the device features and for first application tests.
The evaluation board can be used wither with a uIO-stick, or with an Arduino Uno.
The uIO-stick is the interface between the PC and the application board such as the TLE9563-3QX.
The TLE9563-3QX SPI communication is emulated by the uIO-stick, which is controlled by the PC software.
The board of the TLE9563-3QX has a connector for the uIO-stick, connectors for the power supply, three
connector for the motor output. And an active reverse battery protection with IPZ40N4S5L-2R8.