Infineon TC1782, User Manual, Page: 14 / 59

TriBoard TC176X/TC116X/TC1782/TC1387
Hardware Manual
TriBoard Features
User’s Manual 2-1 V 2.1, 2009-06
2 TriBoard Features
The TriBoard TC176X/TC116X/TC1782/TC1387 is soldered with a device of the
TC176X or TC116X or TC1782 or TC1387. This devices fits into all members of this
product family so that there are no special TriBoards necessary.
2.1 Summary of Features
– Infineon’s TC176X, TC116X, TC1782 or TC1387 Controller in LQFP176 Package
– FlexRay Transceivers (optional if not with TC1767 or TC1782 or TC1387)
– Safety device (optional if not with TC1387)
– High Speed CAN Transceivers
– USB to UART bridge
– Crystal 20MHz (default), Oscillator or External Clock
– USB miniWiggler for easy debugging
– 8 Low Power Status LEDs
– 8-DIP switches for configuration
– access to all pins of controller
– 100mm x 160mm (EURO-Board)
Connectors
The TC176X / TC116X / TC1782 / TC1387 TriBoard offers a wide variety of connectors:
– Standard power connector
– USB connector for ASC Interface (ASC0) and miniWiggler
– 16-pin header for JTAG interface (OCDS)
– 10-pin header for DAP (only TC1767, TC1782, TC1387)
– 2 x 10pin (2x5) Header for CAN High Speed Transceiver (CAN0 and CAN1)
– 2 x SUB-D9 Plug connector for FlexRay (optional if not with TC1767, TC1782,
TC1387)
– four 80-pin connectors (male) + four 80-pin connectors (female) with all I/O signals
– optional ETK connector
Components
– Infineon’s Next generation micro controller supply TLE 7368 G
– Three LEDs to validate power supply (5Volt / 3,3 Volt / VCORE)
– LED indicating /HDRST (ESR0) active state
– LED indicating activ miniWiggler
– LED switched via DAS software
– Infineon’s FlexRay Communication Controller SAK-CIC310 (optional if not with
TC1767, TC1782, TC1387)
– 2x FlexRay Transceiver AS8221(AMS) or TJA1080 (NXP) (optional if not with
TC1767, TC1782, TC1387)
– 2 x Infineon’s High Speed CAN-Transceiver TLE 6250 GV33
– Infineon’s Safety Device SAK-CIC61508(optional if not with TC1387)