Workspace
Explorer
Component
Catalog
Component
Search Box
Figure 13
Schematic and component catalog
1.
Place Components in the design
This design uses several Components: three digital output pins, a UART, a Watchdog Timer, and an
Interrupt. In this step, you add them to the design. You configure them in subsequent steps.
shows the result
a.
In the Component Catalog, expand the Communications group, drag a UART (SCB) Component
into the schematic, and drop it. It doesn’t matter where you put a Component
b.
Expand the Ports and Pins group, and drag a Digital Output Pin into the design
c.
Expand the Digital group, and drag a Timer Counter (TCPWM) Component into the design
d.
Expand the System group, and drag an Interrupt Component and a Clock Component into the
design
Getting started with PSoC
™
6 MCU on PSoC
™
Creator
4 My first PSoC
™
6 MCU design using PSoC
™
Creator
Application Note
19
002-21774 Rev. *G
2022-07-21
