User Manual
14
V 1.1
2022-09-12
User manual for MERUS™ audio amplifier configurato
r
MA2304DNS/MA2304PNS
Using the software
3.2.2
I
2
S/TDM page
On the I
2
S/TDM page, communication-related configurations can be set up. The I
2
S configuration is default.
To route the I
2
S output out of the MA2304DNS
, it is necessary to enable the “TX_ENABLE” control and load a
DSP program that supports this.
Figure 19
I
2
S/TDM page
Audio interface format controls
These controls are used to configure the audio interface format. Refer to the device datasheet for details on
audio interface format and timing.
The SLOT SIZE control affects the number of SCK cycles per channel.
The DATA SIZE control adjusts the bit depth of the data to and from the audio interface.
