User Guide
3 of 44
Revision 1.0
2020-05-22
EVAL-M3-302F User Guide
iMOTION™ Modular Application Design Kit
Important notice
1
Important notice
Attention:
The Evaluation Boards and Reference Boards as well as the information in this document are
solely intended to support designers of applications in evaluating the use of products from
Infineon Technologies for their intended applications.
Environmental conditions have been considered in the design of the Evaluation Boards and
Reference Boards provided by Infineon Technologies. The design of the Evaluation Boards
and Reference Boards has been tested by Infineon Technologies only as described in this
document. The design is not qualified in terms of safety requirements, manufacturing and
operation over the entire operating temperature range or lifetime.
The Evaluation Boards and Reference Boards provided by Infineon Technologies are subject
to functional testing only under typical load conditions. Evaluation Boards and Reference
Boards are not subject to the same procedures as regular products regarding returned
material analysis (RMA), process change notification (PCN) and product discontinuation (PD).
Evaluation Boards and Reference Boards are not commercialized products, and are solely
intended for evaluation and testing purposes. In particular, they shall not be used for
reliability testing or production. The Evaluation Boards and Reference Boards may therefore
not comply with CE or similar standards (including but not limited to the EMC Directive
2004/EC/108 and the EMC Act) and may not fulfill other requirements of the country in which
they are operated by the customer. The customer shall ensure that all Evaluation Boards and
Reference Boards will be handled in a way which is compliant with the relevant requirements
and standards of the country in which they are operated.
The Evaluation Boards and Reference Boards as well as the information provided in this
document are addressed only to qualified and skilled technical staff, for laboratory usage,
and shall be used and managed according to the terms and conditions set forth in this
document and in other related documentation supplied with the respective Evaluation Board
or Reference Board.
It is the responsibility of the customer’s technical departments to evaluate the suitability of
the Evaluation Boards and Reference Boards for the intended application, and to evaluate
the completeness and correctness of the information provided in this document with respect
to such application.
The customer accepts that the Evaluation Boards and Reference Boards are not intended to
be used in life-endangering applications such as medical, nuclear, military, life-critical or
other applications, where failure of the Evaluation Boards and Reference Boards, or any
results from the use thereof, can reasonably be expected to result in personal injury.
The Evaluation Boards and Reference Boards and any information in this document is
provided "as is" and Infineon Technologies disclaims any warranties, express or implied,
including but not limited to warranties of non-infringement of third party rights and implied
warranties of fitness for any purpose, or for merchantability.
Infineon Technologies shall not be responsible for any damages resulting from the use of the
Evaluation Boards and Reference Boards and/or from any information provided in this
