User Manual
Please read the Important Notice and Warnings at the end of this document
Revision 1.0
www.infineon.com
2019-07-25
AN2019-03 EVAL-M1-36-44A User Manual
EVAL-M1-36-44A User Manual
iMOTION™ Modular Application Design Kit
About this document
Scope and purpose
This application note provides an overview of the evaluation board EVAL-M1-36-44A including its main features,
key data, pin assignments and mechanical dimensions.
EVAL-M1-36-44A is a complete evaluation-board including a 3-phase IPM for motor drive applications. Together
with EVAL-M1-101T or EVAL-M1-099M it features and demonstrates Infineon’s IPM technology for motor drives.
The evaluation board EVAL-M1-36-44A for Intelligent Power Modules (IPM) was developed to support customers
during their first steps designing applications with CIPOS™ Nano power modules.
Intended audience
This application note is intended for all technical specialists working with the EVAL-M1-36-44A board.
Table of Contents
About this document ....................................................................................................................... 1
Table of Contents ........................................................................................................................... 1
1
Safety precautions ......................................................................................................... 2
2
Introduction .................................................................................................................. 3
3
Main features ................................................................................................................ 5
3.1
Key data ................................................................................................................................................... 6
4
Pin Assignments ........................................................................................................... 10
5
Getting Started with EVAL-M1-36-44A ............................................................................. 12
5.1
Setting up the system............................................................................................................................ 12
5.2
iMOTION™ development tools and software ....................................................................................... 14
5.2.1
MCEWizard setup overview .............................................................................................................. 14
5.2.2
MCEDesigner setup overview .......................................................................................................... 16
6
Schematics and Layout .................................................................................................. 18
6.1
DC-Link Voltage Measurement ............................................................................................................. 18
6.2
Inverter section using CIPOS™ Nano IPM ............................................................................................. 19
6.3
Current Measurement and Over Current Circuit .................................................................................. 20
6.4
Auxiliary Power supply .......................................................................................................................... 21
6.5
PCB Layout ............................................................................................................................................ 22
7
Bill of Materials of EVAL-M1-36-44A ................................................................................. 24
8
Reference .................................................................................................................... 27
Revision History ............................................................................................................................ 28