Application Note
4
<Revision 1.0>
<2017-08-21>
EVAL-M1-099M-C User Manual
iMOTION™ Modular Application Design Kit
Main features
3
Main features
EVAL-M1-099M is a control evaluation board for motor control application. The kit demonstrates Infineon’s
motion control IC technology.
Main features of Motion Control IC are:
•
MCE (Motion Control Engine) - Dedicated computation engine for high efficiency sinusoidal sensorless
motor control
•
Supports both interior and surface permanent magnet motor
•
Built-in hardware for single or leg shunt current feedback reconstruction
•
Loss minimization Space Vector PWM
•
Two-channel analog output
•
JTAG programming port for emulation/ debugger
•
Serial communication interface (UART)
•
Internal 16 Kbyte OTP memory
•
Multiple motor parameter support
•
3.3V single power supply
•
V
SP
control mode
•
PG output
•
Internal temperature sensing
•
External NTC thermistor from power board temperature sensing support.
The evaluation board characteristics are:
•
Complete kit for running any permanent magnet motor via sensorless sinusoidal control
•
3.3V single power supply
•
JTAG and UART interface, isolated via opto-isolation box
•
Capable of 3-phase and three types of 2-phase modulation
•
RoHS complaint
•
PCB is 45 x 45 mm and has two layers with 35
μ
m copper each