Figure 1
PROFET
™
+2 Arduino Shield
1.2
Key features
The PROFET
™
+2 Arduino Shield has the following features:
•
Either an Arduino Uno R3, or an Arduino Due, or an XMC
™
1100 Boot Kit, or another similar board, connected
to the shield, can control the four power channels via the general IO pins
•
Drives resistive, capacitive and inductive loads with PWM or in DC (e.g. car bulbs, valves, motor relays,
capacitors, LEDs...)
-
Infineon PROFET
™
devices have an integrated charge pump, internal protection features and a current
feedback to the ADC of the microcontroller
-
Supply voltage: functional range: 4.1 V - 28 V; nominal range: 3.1 V - 35 V
-
Nominal current between 11 A per channel (BTS7008-1EPP) and 21 A (BTS7002-1EPP) per channel
restricted due to the limited power dissipation of the PCB and the used PROFET
™
PROFET
™
+2 12V Arduino Shield
1 Introduction
User Manual
3
Rev. 1.00
2019-10-23
