7 - 1
Transpector XPR 3+ Operating Manual
Chapter 7
Maintenance
7.1 Introduction
The Transpector XPR 3+ sensor is subject to aging in normal use and some of its
components will eventually require repair or replacement.
The Transpector XPR 3+ electronics module does not normally require repair or
maintenance.
WARNING - Risk Of Electric Shock
Opening the Transpector XPR 3+ Electronic Module
should only be done by qualified service personnel.
There are no user-serviceable parts inside the Electronic
Module.
INFICON provides complete maintenance service for both sensors and Electronic
Modules. Refer to
section 1.3, How To Contact Customer Support, on page 1-2
.
7.2 Safety Considerations
If Transpector XPR 3+ is used in a manner not specified by INFICON, protection
provided by the equipment may be impaired.
7.2.1 Toxic Material
The Transpector XPR 3+ sensor does not contain any toxic material. However, if
the Transpector XPR 3+ sensor is used in an application wherein toxic material is
used or generated, residue of the toxic material will likely be present on the surface
of the Transpector XPR 3+ sensor. Appropriate safety precautions must be taken
when handling contaminated sensors in order to assure safety of maintenance
personnel.
To return the sensor to INFICON for repair, refer to
Transpector XPR 3+ to INFICON, on page 1-3
The Transpector XPR 3+ electronics module is RoHS compliant.
7.2.2 Radiation
Transpector XPR 3+ Gas Analysis systems are not known to produce
harmful radiation.