Inficon Pernicka 700H CHLD Translation Of The Original Operating Instructions Download Page 14

Page: 14 / 100

3 | Shipment, Transport, Storage

INFICON

14 / 100

Pernicka-700H-CHLD-Operating-instructions-jin76aen1-04-(1911)

NOTICE

Damage caused by transport

The unit and the cryogenic pump compressor can be damaged during transport. The

delivery consists of a box with the Pernicka 700H CHLD and a cardboard box with the

cryogenic pump compressor. The transport box is secured with tilt and shock sensors.

► If one of the indicators of the shock or tilt sensors is red, proceed as follows: Do not

refuse to accept the delivery. Note the red indicator on the delivery note and

immediately check the delivery for transport damage. If you notice any transport

damage, do not open the package. Contact your transport company immediately.

Storage

Store the device and the cryogenic pump compressor observing the technical data,

see "Technical data [

}

26]".

Summary of Contents for Pernicka 700H CHLD





































































































Search results

Summary of Contents for Pernicka 700H CHLD

Reviews:

Related manuals for Pernicka 700H CHLD

Brands by name

Popular brands

Inficon Pernicka 700H CHLD, Translation Of The Original Operating Instructions

Search results

Summary of Contents for Pernicka 700H CHLD

Reviews:

Related manuals for Pernicka 700H CHLD

Brands by name

Popular brands