Inficon Micro GC Fusion 2-Module Operating Manual Download

Page: 71 / 319

INFICON

Installation | 6

074-594-P1H Micro GC Fusion Operating Manual

71 / 319

6.5 Installing the Rack Mount Kit

6.5.1 Rack Mount Kit (PN 952-4100-G1) Parts

Description

Quantity

952-4005-P2

Bracket-rack mount right (with handle)

952-4006-P2

Bracket-rack mount left (with handle)

070-2026*

Handle 6.375 LG 2-leg 10-32 THD SS RoHS

070-2028

Washer countersink #10 hole 0.593 OD SS

070-2027

Nut retainer G-type 10-32 THD Steel/ZN RoHS

090-062

Screw, 10-32 x 0.375 lg phil flat head SS

090-077

Screw, 10-32 x 0.750 lg phil oval head SS

074-683-P1

Micro GC Fusion rack mount IS

*PN 070-2026 is preassembled on PN 952-4005-P2 and 952-4006-P2 at the factory.

6.5.2 Required Tools

• Phillips-head screw driver
• 3 mm hex driver

6.5.3 Rack Mount Kit Installation

The following procedure indicates the necessary materials and proper procedure
when installed the 4-module Micro GC Fusion into a rack.

1 Ensure the instrument is turned off and all connections are removed (including

the power supply, Ethernet cable and carrier gas lines).

2 Remove the rubber feet from the bottom of Micro GC Fusion by removing the

hex screw located at the center of the foot. Properly store the rubber feet and
screws for future bench top installation.

Summary of Contents for Micro GC Fusion 2-Module
































































































































































































































































































































Search results

Summary of Contents for Micro GC Fusion 2-Module

Reviews:

Related manuals for Micro GC Fusion 2-Module

Brands by name

Popular brands

Inficon Micro GC Fusion 2-Module, Operating Manual

Search results

Summary of Contents for Micro GC Fusion 2-Module

Reviews:

Related manuals for Micro GC Fusion 2-Module

Brands by name

Popular brands