Inficon Micro GC Fusion 2-Module Operating Manual Download Page 195

Page: 195 / 319

INFICON

Software Operation | 9

074-594-P1H Micro GC Fusion Operating Manual

195 / 319

9.10.5 Search

Runs can be searched by analysis name (name run on the main page), method name,
compound name (defined in calibration) or by tags.

1 Click the icon.

2 Select Search. Type the parameter to search.

3 Click the icon to apply the search.

9.10.6 Export Runs

Raw data and peak information can be exported as a report. Reports can be exported
into the following formats:

JSON

Micro GC Fusion native file format
NOTE: Micro GC Fusion software is the most effective tool to view
and reprocess exported run(s)

CSV

Comma separated text file format that can be easily viewed using
Microsoft

Excel

or Notepad

Summary of Contents for Micro GC Fusion 2-Module
































































































































































































































































































































Search results

Summary of Contents for Micro GC Fusion 2-Module

Reviews:

Inficon Micro GC Fusion 2-Module, Operating Manual, Page: 195 / 319

Search results

Summary of Contents for Micro GC Fusion 2-Module

Reviews: