Inficon Micro GC Fusion 2-Module Operating Manual Download Page 163

Page: 163 / 319

INFICON

Software Operation | 9

074-594-P1H Micro GC Fusion Operating Manual

163 / 319

9.4.2 Edit Method

1 In the Method/Sequences window, select the desired method.
2 Click the icon to edit the highlighted method. The Method Editor window is

displayed.

3 In the Method Editor window, edit method parameters of each GC module.

Continuous mode is not available with backflush module. Enhanced injection
is not available with backflush and fixed volume injectors.

4 When finished editing the method parameters, click the icon to save the

method or click the icon to leave the method editor without saving.

Summary of Contents for Micro GC Fusion 2-Module
































































































































































































































































































































Search results

Summary of Contents for Micro GC Fusion 2-Module

Reviews:

Inficon Micro GC Fusion 2-Module, Operating Manual, Page: 163 / 319

Search results

Summary of Contents for Micro GC Fusion 2-Module

Reviews: