Inficon Micro GC Fusion 2-Module Operating Manual Download

Page: 152 / 319

8 | Front Panel Operation

INFICON

152 / 319

074-594-P1H Micro GC Fusion Operating Man-

ual

8.4 Run a Loaded Method or Sequence

Perform the following steps to run a loaded method or sequence from the
Micro GC Fusion front panel display:

1 Ensure the desired method or sequence is loaded. If not, load the desired

method or sequence by following the steps in Select and Load a Method or
Sequence [

}

151].

2 Tap the green RUN button to begin a sample run.

3 The RUN button displays Running and the process of the run is indicated by the

movement of the blue band on the circumference of the button.

4 Once the run is completed and the starting method conditions are met, the green

RUN button reappears.

Summary of Contents for Micro GC Fusion 2-Module
































































































































































































































































































































Search results

Summary of Contents for Micro GC Fusion 2-Module

Reviews:

Related manuals for Micro GC Fusion 2-Module

Brands by name

Popular brands

Inficon Micro GC Fusion 2-Module, Operating Manual

Search results

Summary of Contents for Micro GC Fusion 2-Module

Reviews:

Related manuals for Micro GC Fusion 2-Module

Brands by name

Popular brands