Inficon HLD6000, Translation Of The Original Operating Instructions

Page: 55 / 90

INFICON Operation | 6
HLD6000-Operating-instructions-kinb43en1-05-(2107) 55 / 90
Status entry Meaning
STANDBY Standby
MEASURE Measuring
ERROR (xxx) Error (error number)
WARNING (xxx) Warning (warning number)
CAL Calibration
6.5.3 Transferring measured data from the internal memory to
a USB stick
You can transfer measured data from the internal memory to a connected USB stick.
1 Connect a USB stick with the USB port on the device.
2 > Recorder > Copy
3 Select the files you wish to copy.
4 Confirm your selection with .
6.5.4 Deleting measurement data
If the internal memory has no more available space for the data record then measured
data can be deleted.
1
> Recorder > Delete
2
Select the files you wish to delete.
3
Confirm your selection with .
6.6 Standby
The device switches to idle mode when you select the button in the measurement
display of the device.
Either pressing the button or pressing the button on the sniffer probe will reactivate
the device.
If the device was in standby mode for more than 25 seconds, you can activate the
device by moving the sniffer line.
6.7 Diagnosis
To the list of active warnings
► > Active Warnings