Inficon ELT3000 Translation Of The Original Operating Instructions Download Page 63

Page: 63 / 74

INFICON

Cleaning and maintenance | 8

ELT3000-Battery Leak-Detector-Operating-instructions-mina95en1-10-(2007)

63 / 74

8 Cleaning and maintenance

All cleaning and maintenance work described here must be carried out without

opening the device cover!

DANGER

Risk of death from electric shock

There are high voltages inside the device. Touching parts where electrical voltage is

present can result in death.

► Disconnect the device from the power supply prior to any cleaning and maintenance

work. Ensure that the electrical supply cannot be switched back on unintentionally.

► Do not open the device covers!

8.1 Gas Control Unit: Cleaning the housing

The housing for the device consists of a painted metal housing and an optional

measuring chamber made of aluminum.

Only use water for moistening.

Avoid cleaning agents that contain alcohol, fat or oil.

Make sure that the device is disconnected from the power supply by

disconnecting the power supply plug.

Wipe the housing with a soft damp cloth.

When cleaning the measuring chamber, use an agent that is suitable for

aluminum surfaces (for example, a gentle household cleaner). Do not use

solvents that can attack the painted metal housing.

8.2 Gas Control Unit: Replace hoses

DANGER

Electrolyte or battery acid is corrosive.

► Avoid contact with skin, eyes, or clothing.

► Wear suitable protective clothing, especially gloves, apron and face protection.

► Observe the information in the respective MSDS.

► Rinse off electrolyte or acid splashes immediately with clean water.

► Consult a physician if necessary.

Summary of Contents for ELT3000











































































Search results

Summary of Contents for ELT3000

Reviews:

Related manuals for ELT3000

Brands by name

Popular brands

Inficon ELT3000, Translation Of The Original Operating Instructions

Search results

Summary of Contents for ELT3000

Reviews:

Related manuals for ELT3000

Brands by name

Popular brands