Inficon 580-000, Original Operating Instructions

Page: 34 / 128

4 | Description INFICON
34 / 128 IRwin-Operating-instructions-mina66en1-15-(1904)
4.7 Concentration of calibration and test gases
Calibration routine Default gas Adjustable range Info
Ex (2.x% CH
4
) 2.2 Vol% CH
4
2.0 - 2.5 Vol% in 0.1
Vol% increments
Select gas close to 50% LEL
Above Ground and
Universal (low range)
10 ppm CH
4
8 - 15 ppm in 0.1 ppm
increments
All three needed in "Classic" AbG
Cal setup.
Select one, two or three in
"Generic" setup.
100 ppm CH
4
80 - 1100 ppm in 1
ppm increments
2.2 Vol% CH
4
1.5 -3.0 Vol% in 0.1
Vol% increments
Bar Hole CH
4
and
Universal (high range)
2.2 Vol% CH
4
2.0 - 2.5 Vol% in 0.1
Vol% increments
Select gas close to 50% LEL
100 Vol% CH
4
80 - 100 Vol% in 1
Vol% increments
Bar Hole CO
2
and
Universal CO
2
20.0 Vol% CO
2
10.0 - 20.0 Vol% in
0.1 Vol% increments
Ex Tox (Tox) Mixture of: 2.2 Vol% CH
4
1.4 - 2.7 Vol% in 0.1
Vol% increments
Select gas close to 50% LEL
2.0 Vol% CO
2
0.5 - 3.0 Vol% in 0.1
Vol% increments
0 Vol% O
2
0.0 - 18.0 Vol% in 0.1
Vol% increments
40 ppm H
2
S 4 - 50 ppm in 1 ppm
increments
40 ppm CO 20 - 160 ppm in 1
ppm increments
Balance: N
2
Not applicable
GC Ethane Analysis
Option 1 mix*
1 Vol% CH
4
Not applicable Timing adjustment only
50 ppm C
2
H
6
Not applicable Timing adjustment only
1000 ppm C
3
H
8
Not applicable Timing adjustment only
GC Ethane Analysis
Option 2 mix*
1 Vol% CH
4
Not applicable Timing adjustment only
50 ppm C
2
H
6
Not applicable Timing adjustment only
*Used only for Function Test of GC Ethane Analysis.
Balance gas is Synthetic Air if nothing else stated (Ex Tox balance is N
2
).