Inficon 551-010, Operating Instruction

Page: 42 / 56

42
Operating the remote control
ZERO button
Pressing the ZERO button activates the background
suppression in the leak detector.
(See the operating instructions of the leak detector.)
Notice: The „calibration“ function can only be activated on the
leak detector, not with the remote control.
5.5 Paging function
With the paging function the remote control RC1000WL can
easily be located, if it is searched sometimes.
Open the following menu at the leak detector:
Settings - Miscellaneous - Paging function
Pressing the button „On“ lets an acoustic signal sound at the
remote control, the button „Off“ quits this signal.
(Available with leak detector software version V. 4.5 at
UL1000/UL5000 and V.1.7 at Modul1000.)
Fig. 28 „Calibration“ status display