Inficon 551-010, Operating Instruction

Page: 30 / 56

30
Operating the remote control
5.3.3 Setting the trigger level
Notice: The trigger level set here does NOT correspond to the
trigger lever set on the leak detector but only applies to
the acoustic alarm signal of the RC1000 remote control.
Setting the trigger level:
The basic level and exponent of the trigger
level of the remote control are set here.
• The individual input fields can be
selected with "<" and ">".
• The selected field is marked red and can
be changed.
• Use the numeric keypad to enter the
desired digit.
• After entering a digit, the mark changes
to the next field.
• Confirm the set level with "OK".
Fig. 12 Trigger level menu