18
Installation
4
Installation
4.1
Connection to the leak detector
RC1000WL (wireless)
The RC1000WL remote control is connected to the leak
detector by means of a wireless data connection.
Connect the leak detector to the radio transmitter for this
purpose (see chapter
The RC1000WL remote control is shipped set-up for connec-
tion with the supplied radio transmitter. This way, the connec-
tion is immediately established upon turning the unit on.
Alternatively, it can also be connected by means of the
enclosed cable, similar to connecting the RC1000C (non-
wireless) remote control. In this case only one connection
cable must be used with the RC1000WL, not more.
RC1000C (non-wireless)
The RC1000C (non-wireless) remote control is connected to
the leak detector by connecting the enclosed connection
cable to the RJ 25 socket (see
).
The connection cable of the RC1000C can be extended up to
28 m by using one or more extension cables.
(Cat.-No. 14022)
Notice:
The leak detectors should have at least following
software versions:
UL1000/UL1000 Fab and UL5000: SW V4.4,
Modul1000: SW V1.6.
Summary of Contents for 551-010
