Inficon 550-520, Translation Of The Original Operating Instructions, Page: 56 / 146

6 | Operation INFICON
56 / 146 UL6000-Fab-Operating-instructions-iina75en1-04-(2109)
2
In the field "Scaling" select between "Linear" and "Logarithmic".
3
Select between the different viewable ”Decades”.
4
To dynamically adjust the upper and lower limit on the leak rate, activate the
option "Autoscale".
5 In the field "Time axis" select the length of the time axis "30", "60", "90", "120" or
"240" seconds.
6
If the option "Autoscale" is not active, select "Lower diagram limit" in the field the
desired decade.
7
Save .
6.2.6.2 Changing the presentation of the bar graph
Fig. 11: Presentation as bar graph
ü Operator or Supervisor rights
1 > Display > Bar graph
2 In the field "Scaling" select between "Linear" and "Logarithmic".
3 Select between the different viewable ”Decades”.
4 To dynamically adjust the upper and lower limit on the leak rate, activate the
option "Autoscale".
5
If the option "Autoscale" is not active, select "Lower diagram limit" in the field the
desired decade.
6
Save .