manualshive.com logo in svg

Inficon 3000 Micro GC, Operating Manual

Share
Download
Inficon 3000 Micro GC Operating Manual Download Page 149

7 - 21

PN

 07

4-

51

9-

P1

C

3000 Micro GC Operating Manual 

7.10  Integrating the Chromatogram

EZ IQ provides integration of peaks for analysis of simple chromatograms. After a 
run is completed, the peaks will automatically be integrated. However, certain 
chromatography may require more elaborate treatment of the data, or special 
integration of specific peaks. Integration events are normally entered in the

 

Integration Events 

window located under 

Method >> Integration Events

, or by 

clicking 

Integration Events

 on the 

Navigation pane

. This section describes how 

to optimize a method for proper integration of data files.

7.10.1  About Integration Events

Integration events are used to customize the integration of certain peaks or regions 
of the chromatogram. 

When adding an integration event to the 

Integration Events 

table, the integration 

changes will be used on all subsequent samples analyzed using this method. 

Save 

the method after making changes.

 

Summary of Contents for 3000 Micro GC













































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands