Inepro PayMatic - Copy Coin, Technical Manual

Page: 38 / 59

Configuaration functions
32 - PM - Copy Coin CM7000 - Xerox Config
Function 90, Start boot mode
With this f unction y ou can put a new sof tware v ersion at the print.
When the print is stay ing in boot mode, y ou can reset it to switching of f the power f rom the
mainboard,
f or 4 or 5 times.
Function 91 to 99, No applicable
Always switch the coin box off and on again for activating the changed settings.
Reading Audit information
By reading Audit inf ormation, y ou gain
v aluable inf ormation about y our copier’s
perf ormance. Audit inf ormation is
retriev ed v ia the display of the coin box.
There are resettable counters and total counters that can not be reset. The resettable counters
can be read in two dif f erent way s, manually and automatically .
Reading the audit information automatically:
The automatic reading is ef f ected by pressing the Up key f or 5 seconds by means of which
all 2 x 8 resettable counters automatically and one af ter another are represented on the
display . The counters that are read in the automatic way cannot be reset.
It is strongly recommend that a pre-prepared spread sheet is av ailable to enter the inf ormation
as each meter is display ed f or approximately 1 second only .
The resettable meters cannot be cleared in this mode.