Inepro PayCon II, Technical Manual, Page: 136 / 144

Appendix V
129 - PayCon II
Appendix VI
Network Switch
The PayCon can be equipped with an unmanaged network switch.
This allows you to connect the PayCon and a printer or multi-
functional device to only 1 network outlet.
Connections
The network switch expands your PayCon with an unmanaged 3-port
switch. The 3 connections are typically:
·
Connection to company network
·
Connection to PayCon
·
Connection to printer or multi functional
Back side Front side
Connecting the network switch to the PayCon
1. Power off the PayCon
2. Remove all cables (network and/or USB) from the left hand side
of the back side of the PayCon. Should you have SAM modules
in place, you do not need to remove them.