4623-02-020/2012 Rev.: 0
RF iNELS/USB
OPERATING MANUAL
Characteristics
Prior to the device installation and commissioning read the assembly and user manual thoroughly. User manual is designed for the device
assembly and for user setting. The manual must be stored with electrical installation documentation. Assembly manual is available on
web pages www.inels.com. Attention, hazard from electrical current related injury! The assembly and connection can be performed only by
employees with the respective specialist electrical qualification upon observing the applicable regulations. Do not touch the life machine
parts. Life threatening hazard. During assembly, maintenance, adjustments, and repair works it is necessary to observe the safety regulations,
standards, and specialist provisions for work with electrical devices. Prior to commencing work on the device, it is necessary that all conductors,
connected parts, and terminals are disconnected from voltage supply. This manual contains only general instructions which must be applied
within the specified installation. The inspection and maintenance work must include the inspection of (with disconnected power supply): -
terminal fastening, - air flow.
Supported actuators:
RF-iNELS/USB device forms communication interface and gate between the units, RF
Control system elements, and multimedia device iMM Client. The units ,RF Control system
elements, can be controlled from iNELS multimedia system, installed in iMM Client.
It is used for:
- central control of all units from one place
- total review (visualization) of the actual state of the units (appliances, devices) directly
on the TV screen
Bidirectional communication:
- sends instructions to the temperature, switching, darkening, and louver actors
- receives instructions from temperature transmitters, controllers, and actuators
SW
RF-INELS/USB
Operation system:
Graphic definition:
Aspect ratio:
Visible area:
Control:
Language:
UBUNTU 32/64 bit
Independent
Independent
Independent
system IMM G4R0 with controller
EN
max. 1W
USB 1.1 and higher,
plug. „A“ 100 m
868 MHz
0 to +55ºC
-20 to +70ºC
IP90
-2
Optional
Optional
22x85x15mm
81 g
ČS EN 60950-1
Requirements
Input:
Interface:
Reach:
Frequency:
Operating conditions:
Operating temperature:
Storage temperature:
Protection:
Contamination level:
Operating surface:
Installation:
Dimensions:
Weight :
related standards:
Technical parameters
Technical parameters
EN
