P. I. E. INEL Sp. z o. o., ul. Mostowa 1, 80-
778 Gdańsk, [email protected] www.inel.gda.pl
Tubular motor with built-in radio receiver with a return channel and overload detection function
Installation and operation manual
YYGL35PRIC-10/17
YYGL45PRIC-20/15
A tubular motor is an InelControl system device for
automatic operation of roller blinds.
The tubular motor features an obstacle detection and
automatic limit position setting functions.
The device includes a radio receiver with return channel.
The data sent over the return channel provide full control of
the device.
Use rigid links and stops in the bottom strip to ensure
correct operation of the tubular motor. The stops must be
installed as close to the guides as possible to ensure
correct operation. A window sill must be installed and the
roller blind curtain length must correspond to the length of
the guides.
1
Safety guidelines
General guidelines
The tubular motor with overload detection is configured by
default to guarantee safe installation and operation, provided
that all guidelines and the relevant safety and accident
prevention regulations are followed.
Installation and repairs must be carried out by a trained and
qualified professional. Do not modify or change the tubular motor
in any way. All warranty repairs must be carried out by the
manufacturer. Use genuine spare parts and accessories only.
The operational safety of the tubular motor can only be
guaranteed if the device is used as intended. The limit values
provided in the specifications must not be exceeded under any
circumstances.
Additional safety regulations
Follow the relevant safety and accident prevention regulations
when installing, commissioning and maintaining the tubular
motor. In particular, observe the following:
1. Fire safety regulations.
2. Accident prevention regulations.
General information on hazards and safety
measures
The following are the general guidelines for use of INEL devices
with other external devices. Follow the guidelines when installing
and operating these devices.
Caution - Failure to take precautions may result in
damage to the tubular motor, roller blind, roller
blind box, facade etc.:
• Check if all screw connections are secure before installing the
tubular motor with radio receiver and setting the limit positions.
Danger - Failure to take precautions may
result in injury or death.
• Check if the local voltage supply parameters correspond to the
device specification.
• Follow the relevant safety and accident prevention regulations.
• Use a circuit breaker for safe power supply disconnection (e.g.
fuse cut-off switch) for all connections.
• Check the power wires and cables regularly for damaged
insulation and continuity.
• Switch off the power supply before replacing damaged cables.
Warning
• Do not let children play with the control devices.
• Keep the control devices out of reach of children.
• Observe the roller blind in motion at all times and keep other
people away until it is fully opened or closed;
• Provide training and instructions for the users on device
operation and related risks. The operator is deemed to have
been trained if the employer, administrator or owner of the
device have instructed and authorised the operator to operate
the device.
2
Installation manual
2.1
Safety
▪
The device must be installed by qualified personnel only.
▪
The weight of the roller blind must not exceed the maximum
load carrying capacity of the tubular motor (see end of this
Manual)
▪
Correct cable installation (loop facing down) will protect the
tubular motor against water damage.
▪
Do not drill holes in the motor housing.
▪
Protect the motor against contact with liquids.
▪
Avoid shocks, impacts and damage to the motor.
▪
Fig. 1.
