Industrial Shields PLC Arduino ARDBOX, User Manual

Page: 11 / 39

Ref. 006001001300 Rev. 0: 30-08-2019
2.
Technical Specifications
2.1 General Specifications:
Power supply
voltage
DC power supply
12 to 24Vdc
Operating
voltage range
DC power supply 11.4 to 25.4Vdc
Power
consumption
DC power supply 30VAC max.
External
power supply
Power supply voltage 24Vdc
Power supply output
capacity
700 mA
Insulation resistance
20MΩ min. at 500Vdc between the AC terminals and the protective ground
terminal.
Dielectric strength
2.300 VAC at 50/ 60 Hz for one minute with a leakage current of 10mA
max. Between all the external AC terminals and the protective earth
terminal.
Shock resistance 80m/s
2
in the X, Y and Z direction 2 times each.
Ambient temperature (operating) 0º to 60ºC
Ambient humidity (operating) 10% to 90% (no condensation)
Ambient environment (operating) With no corrosive gas
Ambient temperature (storage)
-20º to 60ºC
Power supply holding time 2ms min.
Weight
350g max.
2.2 Performance Specification:
Arduino Board ARDUINO LEONARDO
Control method
Stored program method
I/O control method Combination of the cyclic scan and immediate refresh processing methods.
Programming language
Arduino IDE. Based on wiring (Wiring is an Open Source electronics platform
composed of a programming
language. “similar to the C”.
http://arduino.cc/en/Tutorial/HomePage
Microcontroller ATmega32u4
Flash Memory
32KB of which 4KB are used by bootloader
Program capacity (SRAM) 2.5KB
EEPROM 1KB