Ref. 004001001200
Rev.3: 17-01-2021
27
Hardware Serial RS-232 .
In order to enable the Hardware Serial RS-232 the total configuration of the Ardbox & DALI
Analog HF will be:
Switch configuration:
o
Available communication protocols:
•
Hardware Serial RS-232.
•
I2C
*If I2C is active I0.0 & Q0.6 are disabled
•
TTL
•
USB
Jumper configuration:
ZONE 1
ZONE 2
Note: The switches of the left
zone of the RS-485 don
’
t
interfere in the RS-232 HS, the
thing is that as pins 0 & 1 are
reserved for the RS-232, the
RS-485 is totally disabled. As it
is disabled, there is no point on
configuring these switches as
RS-485 mode
Summary of Contents for DALI 20
