4
Settings
Guidelines
Accessing Settings
Settings Menus
Examples for Working in Settings
Reviewing and Editing Settings
Guidelines
Settings that can be adjusted manually through the instrument are described in this Product Manual. These
and other settings can also be adjusted through compatible Industrial Scientific docking stations and
accessories supported by iNet Control, DSSAC, and Accessory Software;
any changes made manually to
the instrument will be overridden when the instrument is docked
.
Only qualified personnel should access and adjust instrument settings; this person is referred to below as
the "safety specialist". To help guard against unintended access by nonqualified personnel, settings can be
security-code protected.
Accessing Settings
Settings can be accessed while the instrument is powering on—any time during the start-up sequence—by
simultaneously pressing then releasing and . If the security-code screen is activated, settings are
protected and the instrument's security code must be entered. If the entered value matches the
instrument's security code, the first settings menu (1.0 Maintenance) will display; otherwise, access to
settings will be denied and the instrument will resume start-up.
—
—
Press
Press
Press
Press
Enter the
displayed
value.
Edit the
value.
Next menu
Start
maintenance