Indu-Sol PROmesh P20, User Manual

Page: 6 / 54

General information
PROmesh P20 - User Manual 6
1 General information
Please read this document thoroughly from start to finish before you begin installing the device and putting
it into operation.
1.1 Overview of the PROmesh P20 functionality
The PROmesh P20 is an industrial Ethernet switch with management and PROFINET functions that can be
easily and conveniently configured via a web application. Thanks to its extensive functions with store-and-
forward technology, it helps you to effectively set up all network topologies, such as bus, star and ring
structure, in your system.
Features:

Web application for configuration

12-48 V supply, protected against polarity reversal, redundant operation possible

Configurable alarms for monitoring all input voltages

16x RJ45, 10Base-T, 100Base-TX

4x SFP 10/100Base-TX, 1000Base-X

PHY and MAC completely compatible to IEEE 802.3, IEEE802.3u and IEEE 802.3x

Auto MDI/MDI-X for 10/100BASE-TX, autonegotiation

Switch mode: Store and forward

MAC address table: 16K (16384 addresses)

PROFINET Conformance Class B

PROFINET Netload Class III

Layer 3 NAT routing

Quality of Service (QoS) with four priority queues

Prioritisation via IEEE 802.1p Class of Service (COS), Type of Service (TOS) / DiffServ or port priority

Limitation of incoming and outgoing packages

Port mirroring (Tx / Rx / Rx and Tx packages)

Port-based VLAN / tagged VLAN IEEE 802.1q

Simple Network Time Protocol (SNTP)

Simple Mail Transfer Protocol (SMTP) for signalling alarms

Internet Gateway Management Protocol Snooping (IGMP Snooping)

Dynamical Host Configuration Protocol (DHCP) client function

Simple Network Management Protocol (SNMP), v1, v2c, v3

Updating, saving and backing up the system configuration via HTTPs, TFTP and memory card