Indian Motorcycle SCOUT BOBBER 2021, Owner'S Manual

Page: 115 / 162

NUMBER DESCRIPTION TORQUE (IF
APPLICABLE)
t Head Pipe Nuts 12 ft-lbs (16 N · m)
y Oxygen Sensors 14 ft-lbs (19 N
·
m)
NNOONN--NNOORRTTHH AAM MEERRIICCAANN M MOODDEELLSS
NUMBER DESCRIPTION TORQUE (IF
APPLICABLE)
q
Muffler Hanger Fasteners 19 ft-lbs (26 N · m)
w
V-Band Clamp 88 in-lbs (10 N · m)
NUMBER DESCRIPTION TORQUE (IF
APPLICABLE)
e Exhaust Mount Nut 50 ft-lbs (68 N
·
m)
r Head Pipe Nuts 12 ft-lbs (16 N
·
m)
t Oxygen Sensors 14 ft-lbs (19 N
·
m)
EELLEEVVAATTIINNGG TTHHEE M MOOTTOORRCCYYCCLLEE
WARNING
Serious injury or death can occur if the motorcycle tips or falls.
Make sure the motorcycle will not tip or fall while elevated or
while on the sidestand.
Some procedures require raising the motorcycle to remove weight
from the component being inspected. Elevate the motorcycle by
placing a stable, flat platform jack or lift mechanism on a firm, flat
surface and lifting under the engine crankcase. The platform
should be a minimum of 12 in (30 cm) square. DO NOT attempt to
lift the motorcycle without proper equipment. Always secure the
motorcycle properly before lifting so it cannot tip or fall when
elevated.
RROOAADD TTEESSTT
Before returning the motorcycle to regular use, perform a road test
in a safe area. Pay special attention to the proper fit and operation
of all serviced components.
113
MAINTENANCE