Indian Motorcycle Indian Challenger 2020, Owner'S Manual

Page: 82 / 178

RROOAADD TTEESSTTSS
Before returning the motorcycle to regular use after performing
service, road test it in a safe environment. Pay special attention to
the proper fit and operation of all serviced components. Make any
corrections or additional adjustments necessary to ensure safe
vehicle performance.
M MAAJJOORR M MAAIINNTTEENNAANNCCEE
Major repairs typically require technical skills and specially
designed tools. Emission system service requires special tools and
training and should be performed by your dealer. See the
INDIAN
MOTORCYCLE Service Manual or an authorized INDIAN
MOTORCYCLE dealer or other qualified dealer.
BBRREEAAKK--IINN M MAAIINNTTEENNAANNCCEE
Perform the break-in maintenance procedures when the
motorcycle’s odometer registers 500 miles (800 km). Please see
your authorized dealer for this service.
Performing the break-in maintenance will help ensure optimum
engine performance for the entire service life of the engine. Your
dealer will change engine oil, inspect all fluids and serviceable
components, ensure that all fasteners are tightened and make
other adjustments as needed.
PPEERRIIOODDIICC M MAAIINNTTEENNAANNCCEE
Inspect, clean, lubricate, adjust and replace parts as necessary.
When inspection reveals the need for replacement parts, use
genuine INDIAN MOTORCYCLE parts available from your dealer.
Record service and maintenance information on page 169.
NOTICE
Use of non-recommended lubricants and components can result
in damage to the motorcycle. Damage resulting from the use of
non-recommended products is not covered by warranty.
Perform maintenance at the specified intervals. Vehicles subjected
to severe use must be inspected and serviced more frequently.
SSEEVVEERREE UUSSEE DDEEFFIINNIITTIIOONN
• high speed operation for extended periods
• low speed operation for extended periods
• operation in dusty or otherwise adverse conditions
• operation in cold weather (temperatures below freezing)
80
MAINTENANCE