Indian Motorcycle Indian Challenger 2020, Owner'S Manual

Page: 70 / 178

OOPPEERRAATTIINNGG SSPPEEEEDDSS AANNDD GGEEAARRSS
ODOMETER
BREAK-IN PROCEDURE
MILES KM
0-90 0-145 Do not operate for extended periods above 1/3
throttle or at any one throttle position. Vary engine
speed frequently.
91-300 146-483 Do not operate for extended periods above 1/2
throttle or at any one throttle position. Vary engine
speed frequently.
301-500 484-800 Do not operate for extended periods above 3/4
throttle.
At 500 At 800 Perform the break-in maintenance outlined in the
maintenance section of this manual. Break-in
maintenance should be performed by a dealership.
Break-in maintenance must include inspection,
adjustments, fastener tightening and an engine oil
and filter change. Performing break-in maintenance
at the required odometer reading helps ensure peak
engine performance, minimal exhaust emissions and
maximum service life of the engine.
FFUUEELLIINNGG
Always dismount the motorcycle and refuel on level ground with
the sidestand down. Review the fuel warnings. Use only the
recommended fuel. See page 155. Hold the nozzle while filling. Do
not rest the weight of the nozzle and hose on the filler neck. Do not
leave the nozzle unattended.
WARNING
Overflows or spilled gasoline could contact a hot engine or
exhaust system and cause a fire, which could result in serious
injury or death. Do not allow gasoline to contact hot components.
WARNING
Always fill the fuel tank slowly to prevent spillage. Do not overfill
the fuel tank. Leave space in the tank to allow for the fuel to
expand.
68
OPERATION