manualshive.com logo in svg

Index G300.2, Operating Instructions And Maintenance Instructions, Page: 56 / 154

Share
Download
Index G300.2 Operating Instructions And Maintenance Instructions Download Page 56

Maintenance Summary - 2.000 Operating hours

It is recommended to document the maintenance activities carried out by using the appropriate

maintenance log. The maintenance log has the document number DIE148EN - 17.08.2022.

C010

 - Check maintenance logs of servicing activities

C023

 - Clean and check wipers of the work area door

C025

 - Check work area door (with electr. drive) and window pane

C040

 - Check and lubricate HSK clamping set (from Ott-Jakob)

C047

 - Check tool clamping sets of the milling spindles

C050

 - Check and potentially replace the cooling lubricant adapter (HSK tool mountings)

C065

 - Check telescopic covers and wipers

C070

 - Check outer wipers of linear guides

C080

 - Check all electrical connections and drive belts of the drive motors

C095

 - Check slat/shingle cover on the telescopes (visual inspection)

C130

 - Replace filter on air conditioner cooling fan

C140

 - Check cooling unit for cooling lubricant

C165

 - Check coolant

C190

 - Clean labyrinth rings of spindles

C510

 - Check backup data carrier

C525

 - Check control cabinet

C545

 - Check cable and hose clamps for tight seating

C555

 - Replace hydraulic fluid filters

C570

 - Wassermann tool change system

C590

 - Maintenance of turret steady rest SR2 or SLU X1 (by SMW)

Maintenance Summary - 2.000 Operating hours

50

Maintenance Instructions

G300.2 G320.2 G400.2 G420 G500.2 G520

DIE147EN - 17.08.2022

Summary of Contents for G300.2



























































































































































Reviews:

No comments