- Check pneumatic system (visual inspection)
Orientation
To ensure trouble-free operation, periodic checks of the pneumatic system are
necessary.
- Check oil level at oiler (optional).
- Check pressure setting on pressure gauge.
- Check supply and fluid lines.
- Check silencers.
- Drain condensate (not applicable to auto-drain).
Example: Pneumatic maintenance unit by FESTO/ Norgren
Due to different requirements and/or specifications of the respective
manufacturers, be sure to review the respective manufacturer's
documentation!
Procedure
1. Check oil level at oiler (optional).
2. Check pressure setting on pressure gauge and adjust if necessary. An
operating pressure of 6 bar has been set at the factory.
3. Check supply and fluid lines (damage and leakage). Supply and fluid lines must
be checked for damage. Pre-damage such as kinks or abrasions should be
logged and replacement should be initiated.
4.
Example: Various silencer versions from FESTO/ Norgren
Check silencers.
Maintenance Summary - Care activities
14
Maintenance Instructions
ABC.2
DIE244EN - 15.08.2022
