Index Braille Everest-D V5 Manual Download Page 38

Page: 38 / 40

Index V5 printer manual

www.indexbraille.com

4.2.4.1

Adjust paper out offset wizard

Wizard steps

Menu/ user service// Paper
out settings/ Wizard to adjust
cut off position

For Basic-D when used with Index
Acoustic hood with cutting
mechanism

Load fresh
paper

Load fresh paper and press OK
to continue

Move to cut
off position,
cut the paper

Cut the paper, press OK to
continue

The printer moves the paper into cut-
off position

Cut-off the paper with the cutting
mechanism

Measure and
Adjust

Measure the deviation between
cutting position and paper
perforation, press OK to adjust.

Arrow up to increase 0,1 mm

Arrow down to decrease 0,1 mm

End of wizard Press OK to save

4.2.4.2

Paper step-length calibration, FanFold

This function calibrates the paper movement made by 4 pair of soft rollers to fit the
movement of the paper tractors.

Menu
position

Menu/ user service/ Paper
step-length calibration

Preparation
3 sheets

Separate the paper into three
contiguous paper sheets.

Make sure that the the same paper
size is selected in active layout as
the calibration paper

Paper in
tractors

Put the three contiguous paper
sheets in the tractors and press
OK to load.

Paper on top
of the tractors

Open the lids on both tractors.
Remove the paper and close the
lids again. Put the paper above
the tractors. Press OK to
calibrate.

Unload paperPress OK to unload paper

Complete

Wizard completed, press OK to
save.

Summary of Contents for Everest-D V5









































Search results

Summary of Contents for Everest-D V5

Reviews:

Related manuals for Everest-D V5

Brands by name

Popular brands

Index Braille Everest-D V5, Manual

Search results

Summary of Contents for Everest-D V5

Reviews:

Related manuals for Everest-D V5

Brands by name

Popular brands