Index Braille
Index 4X4 PRO
Page 24
January 2000
Version 1.20
7.
Control sequences
Note! When using WinBraille, it will overtake all commands and the commands listed os this page is
not applicable
ESC sequences marked with "-" (minus) are removed from the text file by 4X4 PRO
ESC sequences marked with "+" (plus) controls
4X4 PRO as listed below.
7.1
Defined codes
Decimal
ctl. char
Function
-
8
^H
Backspace
-
9
^I
Horizontal Tab. Skip
+ 10
^J
Line-feed
- 11
^K
Vertical Tab-skip
+ 12
^L
Form Feed
+ 13
^M
Carriage return
- 14
^N
Double with (for 1 line only)
- 15
^O
17 CPI (condensed)
- 17
^Q
Print suppress OFF
- 18
^R
10 CPI (pica)
- 20
^T
Double with OFF (Before end of line)
+ 24
^X
Clear Buffer
+ 27
ESC
ESC - before codes
+ 32
Space
Space
+ ESC 5
53
Automatic Line feed
ESC 51
Auto Line Feed ON
ESC 51
Auto Line Feed OFF
+ ESC \
92
Select all Characters Chart
ESC\n1(n2x256)
Transparent mode where n1 and n2 (Hex) are the number of characters in the
transparent string. In the string there is no translation “bit 1” corresponds to
“dot”, “bit 2” to “dot 2” etc.
+ Esc^
94
Prints 1 character from all character chart.
7.2
ESC Sequences - Index commands
ESC ^C
Select 6-dot Braille cell
ESC ^D
Select 8-dot Braille cell
7.3
Page numbering by ESC sequences
If printing several documents, that should be connected to each other as one document, it is possible to
select continuous page numbering.
To choose continuing number from the of the previous document, send the following ESC-sequence in the
beginning of the file, like a driver:
ESC^Q,0,ESC
To choose a certain page number from the first page of the next document, send the following ESC-
sequence in the beginning of the file, like a driver:
ESC^Q,xxx,ESC