Index Braille
Index 4X4 PRO
Page 16
January 2000
Version 1.20
5.3.4
Options
The following options are available:
Word wrap
On/Off.
Auto Line-feed
On/Off.
Form feed
On/Off.
Volume
1/2/3/4/5.
Impact level
1/2/3/4/5.
Delay time
1/2/3/4/5.
Setup
Open/Not open.
Print folding
Off/1/2/3/4/5
5.3.4.1
Word wrap
Select between split words, or wrap to the next line if a word exceeds the end of the line.
5.3.4.2
Auto line-feed
Select automatic line-feed, together with a carriage return, according to your computer software.
5.3.4.3
Form Feed
Select ON to get an empty page between each Braille copy of a document.
5.3.4.4
Volume
Select the volume of the speech feedback.
5.3.4.5
Impact level
Select the impact level of the hammers for different paper qualities.
5.3.4.6
Delay time
Select the delay time which the embosser waits for more information after a file.
Note! Using a computer with a slow disc-drive requires a longer delay time in the embosser.
5.3.4.7
Set up
Select access to setup. Not open gives access only by the command “power on + Setup key”.
Open allows access by pressing the Setup key when embosser is on stand by.
Changing of access to Set up (Open/Not open) will effect all three setups, A/B/C.
5.3.4.8
Print folding
With print folding you can select the strength of the pre-folding line (according to the paper quality) or
to de-select the pre-folding line.
Note! It is important not to select a too hard impact of the pre-folding line, as it may decrease the life-
cycle of the stapled magazine.