Index Braille
Index 4X4 PRO
Page 14
January 2000
Version 1.20
5.3.3.4
Page width
Page width between 100 and 297 mm can be chosen. The page width defines the number of line per
page.
5.3.3.5
Page length setting
Command: Double-click the Form Feed Key.
A paper will be fed trough the printer, following a message giving the length of the paper in millimetres,
then a second paper is fed trough where the pre-folding line (mid position of the paper) is created.
Check that the position of the line is correct by folding the paper. The edges of the paper should match
each other.
If there is a mismatch of the paper edges, follow the instructions with chapter 6.9
5.3.3.6
Number of page
Index 4X4 can also be used as an ordinary Everest printer, printing normal double-sided or single-sided
Braille, 1 or 2 pages per paper.
With item number of page you can select
1 gives single sided printout in landscape mode.
2 gives double sided printout in landscape mode.
4 gives saddle stitch binding printout.
Note! If 1 or 2 is selected, you can switch between single and double sided printout from the control
panel.