Indel GIN-SAC4 Series, Hardware User Manual, Page: 38 / 94

SAC4xX User Manual
01.04.2020 Rev 1.42en 38
7.3.2. Mains connection and intermediate circuit
Rated data GIN-SAC4xX
230 V 400 V
Rated 1-phase mains voltage V
AC
1 x 110
-10%
... 230
+10%
1 x 110
-10%
... 400
+10%
Rated 3-phase mains voltage V
AC
3 x 110
-10%
... 230
+10%
3 x 110
-10%
... 400
+10%
Rated Power S1 SAC4x4 230V/400V 3ph kVA 6.5
11.3
Rated Power S1 SAC4x3 230V/400V 3ph kVA 4.9
8.5
Rated Power S1 SAC4x2 230V/400V 3ph kVA 3.3
5.7
Rated Power S1 SAC4x1 230V/400V 3ph kVA 1.7
2.9
Overvoltage cut-out V
DC
400 800
Maximum network asymmetry
± 3%
Mains frequency Hz
50...60
Intermediate DC circuit capacity GIN-
SAC4x4 µF
3760 940
Intermediate DC circuit capacity GIN-
SAC4x3 µF
2820 705
Intermediate DC circuit capacity GIN-
SAC4x2 µF
1880 470
Intermediate DC circuit capacity GIN-
SAC4x1 µF
940 235
Permitted network types
star point earthed
TT, TN
Switch-on interval s
> 10
External fuse protection SAC4x4 AT
25 A
External fuse protection SAC4x3 AT
16 A
External fuse protection SAC4x2 AT
16 A
External fuse protection SAC4x1 AT
16 A
Switch-on current A
< 2
Overvoltage category
III (EN 61800-5-1)
See Chapter 8.4 on page 56 and chapter 8.5 on page 58.
For operation of the Device an external mains filter and an external Fuse is required on the mains connec-
tion.
The rating of the fuse are maximum values. In cases where the real application does not require the full
power of the drive, a fuse and mains filter with lower current rating can be calculated and installed by the
machine developer.