Indel Webasto Isotherm SED00036DA, Instruction Manual

Page: 44 / 212

ISOTHERM Digital Display
44
• F-C [To set the measurement unit to Fahrenheit or Centigrade]
• O C [Activates or deactivates Over Cooling]
Over Cooling is intended as extra cooling with respect to the set temperature. It is
only active when the ITC function is activated and remains active until turned off by
the user. This function allows you to accumulate cooling energy within food and drink
which will then be released when the surplus energy is no longer available, to save
energy when the power will be supplied by the battery only.
It is only active when the system detects a surplus of energy with batteries fully
charged, the motor on and the battery charger active.
- The system sub-cools up to 3°C (5.4°F) lower with respect to the
temperature set with the temperature limit at 0°C (32°F).
- If the system is configured to operate as a freezer for temperatures below
-4°C (24.8°F), the system will sub-cool up to 1°C (1.8°F) lower with respect to
the set temperature.
- Over Cooling is irrelevant to the system for all temperatures set between 1°
and -3°C (33.8 and 26.6°F).
• rOF [Refrigerator or Freezer] defines the minimum temperature
limit for setting from the panel from +6°C to -22°C (+42 to -7°F).
o To exit from the sub-menu function, press button «1» or wait
approximately 10 sec.