HFL-300/400 User Manual
Page 6 of 16
Copyright 2020 IndeeLift Inc. All Rights Reserved
Preparing the HFL- 300/400 for Use:
Unpacking the HFL- 300/400:
The HFL comes packaged for shipment in a carton that is sealed with shipping tape. The unit ships
without the wheels attached. Packed inside the shipping carton will be the HFL, user manual and a
box containing the wheel components, instruction sheet and wrench, as well as the AC power cord
that connects to the battery charger. NOTE: HFL 300-D/400-D units also ship with two safety belt
assemblies, (see Appendix A for more information on the HFL 300-D/400-D units).
Cut or remove the shipping tape on the top flaps of the carton.
Stand the packing carton with the heavy end down.
Open the box and remove the foam and cardboard shipping reinforcement inserts.
Remove the box containing the wheel components and the AC power cord.
NOTE: The “-D” units have an additional bag in the box containing two safety belt assemblies.
Remove the HFL and place it in an upright position on the floor.
Attach the wheels by following the instructions found in the box with the wheel components and
wrench.
Remove the wired remote from its protective bag.
Test the HFL by raising and lowering the seat using the wired remote’s up and down buttons.
Properly dispose of the packaging materials.
NOTE: If the unit is intended for self-operation, use the hanger clip on the back of the wired
remote to place it on one of the lower rise assist handles. If the unit is intended for assisted
operation, place the wired remote on one of the upper transport handles.
