INDEECO
425 Hanley Industrial Court • St. Louis, Missouri • 63144 • USA
(314) 644-43
00 • FAX (314) 644-5332 •
www.indeeco.com
ENM-2072-01 / 24-2241-83-1EF
INSTALLATION INSTRUCTIONS
DIFFUSER ACCESSORY KITS
UHIR Series Electric Unit Heater
Cabinet Size
(Reference heater nameplate)
Radial
Diffuser Kit
Anemostat
Diffuser Kit
1
1024152
1024155
2 & 3
1024153
1024156
4
1024154
1024157
A. Radial Diffuser:
1.
Loosen sheet metal screws located in the side of the heater cabinet to free directional louvers. Do not remove. Reference
Figure 1 below for location.
2.
Remove directional louvers and retighten sheet metal screws from step 1.
3.
Using the 8 supplied sheet metal screws, mount radial diffuser in pre-punched holes located in the heater cabinet as
shown in Figure 2.
4.
Adjust louvers to direct airflow as desired.
B.
Anemostat Diffuser:
1.
Remove sheet metal screws and directional louvers as shown in Figure 1.
2.
Remove front cabinet panel. See Figure 3 for attachment screw locations.
3.
Using the supplied bolts, nuts and lock washers, install anemostat diffuser into the pre-punched holes in front panel.
4.
Reinstall front heater cabinet panel.
WARNING
Accessory kit installations should be performed by a qualified electrician.
Disconnect all power supplies before working on equipment.
Select a heater installation location where the outlet air is not directed at an adjacent wall.
