background image

Golden Tee

®

 PGA TOUR

®

 Edition

                                      

Version 5/22

                                                                     

Page 3

 

© Copyright Incredible Technologies, Inc.  All Rights Reserved.  Unauthorized duplication is a violation of applicable law. 

All other marks are the properties of their respective owners. All rights reserved. Commercial. PN 900365060 

 

WARNINGS AND NOTICES 

NOTICE 
 

 

This game is intended to be operated for amusement purposes only. It is not to be operated in violation of any 
federal, state, or local laws or regulations. As the owner and/or operator of this game you are responsible for 
its operation in compliance with such laws and regulations. The factory settings for this game may require 
adjustment to comply with the laws and/or regulations in the jurisdiction where the game is located. It is the 
sole responsibility of the operator to determine what laws and/or regulations are applicable and to make any 
adjustments to the game before operating it for its intended purpose. 
 

 

This guide and the information contained within is subject to change without notice. 

 

WARNING 
 

 

Use of unauthorized parts or making any unauthorized modifications will void the warranty and may result in 
the game operating in an unsafe or incorrect manner. 
 

 

If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer 
or its service agent. 
 

 

This cabinet is not suitable for installation in an area where a water jet would be used.  The cabine t must not be 
cleaned by a water jet. 

 

WARRANTY, REPAIR, AND RETURN POLICY 

 

 

90-day warranty on all electronic components. All warranty periods begin on the date of purchase from 
Incredible Technologies, Inc. 

 

There is a minimum $75.00 service charge for all non-warranty repairs or returns. 

 

For all servicing, return to Incredible Technologies, Inc. 

 

ANY non-factory repair or attempted repair voids warranty. 

 

RETURN MERCHANDISE AUTHORIZATION 
 

 

All returned merchandise must have a Return Merchandise Authorization (RMA) number marked clearly on 
the outside of the package. 

 

You must obtain all RMA numbers from Incredible Technologies. Please have the product's Cabinet 
Identification Device number available when calling for an RMA number. 

 

Merchandise returned without an RMA number will not be accepted. 

 

Warranty may be void if serial number or security labels are tampered with or removed. 

Opening the System 

Box will void your warranty. 

 

Advance replacement hardware will be shipped to the customer address on file unless specified otherwise. 

 

Advance replacement hardware will be billed to the customer until Incredible Technologies, Inc. receives the 
returned merchandise, at which time a credit will be issued. 

 

All repairs and/or replacements will ship as soon as possible after receipt or request (subject to availability). 

 

PAYMENT FOR AND STORAGE OF REPAIR MATERIALS 

Materials sent to IT for repair must be paid for according to current price schedules and in a reasonable time. 
Storage fees for repaired equipment will be charged at a rate of $50.00 (Fifty US Dollars) per calendar month or 
fraction thereof after 90 (Ninety) days from notice to the customer that the repairs are complete. IT reserves the 
right to resell repaired equipment to cover accumulated storage charges when the accumulated storage charge 
reaches 100% (One Hundred Percent) of the repaired items’ then-current replacement cost.  

 

 

Summary of Contents for Golden Tee PGA TOUR






























Reviews: