manualshive.com logo in svg

Incredible Technologies Golden Tee PGA TOUR, Install Manual, Page: 23 / 29

Share
Download
Incredible Technologies Golden Tee PGA TOUR Install Manual Download Page 23

Golden Tee

®

 PGA TOUR

®

 Edition

                                      

Version 5/22

                                                                     

Page 23

 

© Copyright Incredible Technologies, Inc.  All Rights Reserved.  Unauthorized duplication is a violation of applicable law. 

All other marks are the properties of their respective owners. All rights reserved. Commercial. PN 900365060 

 

6C 

– HANG MONITOR 

 
With an assistant, carefully lift the monitor into position and hang the monitor on the Mount Plate. Do not lock the 
quick release spring clips until the monitor has been evenly centered against the shroud. All sides should be 
even. With the spring clips unattached, the monitor will swing out making it easy to insert the HDMI Cable into the 
HDMI Input on the back of the monitor. Connect the AC Power cable from HDTV to power strip. 
 

 

 
 
 
 
 

ADJUST SPRING CLIP CORDS 

TO HANG JUST ABOVE THE 
BOTTOM OF MONITOR FOR 

EASY ACCESS FROM FRONT 

 

 

 

 

 

Summary of Contents for Golden Tee PGA TOUR






























Reviews:

No comments