EK-WL8-TRH/AU
WIRELESS TRANSLATOR
MODULE
STFV.425551.070-AU-UM rev. 4
20.08.2020
Page 9 of 22
INSTALLATION
Avoid installing the translator close to:
-
equipment that uses large amounts of electrical current
-
large metal objects, structures or metal ceiling structures
-
fluorescent lighting fixtures
-
computers, their peripheral and network cabling.
If there are other translators or wireless system expander modules, keep a
distance between them of at least 2 meters. In general, all wireless devices
(child devices included) should be installed at least 2 meters from each oth-
er.
It is recommended to install the translator and expanders at least 2 - 2.5 me-
ters from the floor.
Environmental conditions (temperature, humidity and so on) must be in the
ranges specified at the beginning of this manual.
After having installed the translator, make sure that the
translator’s child de-
vices (sensors, call points, etc.) receive a good, strong signal (refer to the
single device’s manuals) in their position of installation.
The translator is mounted on two screws, pre-screwed into the wall accord-
ing to the following marking:
188*
155
180
1
2
0
1
2
7
*
After hanging the translator, it can be fixed on the wall by screwing one or
two additional screws.
Summary of Contents for ekho EK-WL8-AU
Page 1: ...EK WL8 TRH AU WIRELESS TRANSLATOR MODULE STFV 425551 070 AU UM rev 4 20 08 2020 Page 1 of 22 ...
Page 6: ...EK WL8 TRH AU WIRELESS TRANSLATOR MODULE STFV 425551 070 AU UM rev 4 20 08 2020 Page 6 of 22 ...
Page 22: ...EK WL8 TRH AU WIRELESS TRANSLATOR MODULE STFV 425551 070 AU UM rev 4 20 08 2020 Page 22 of 22 ...
