Incite Fire ekho EK-WL8-AU, Manual

Page: 17 / 22

EK-WL8-TRH/AU
WIRELESS TRANSLATOR
MODULE
STFV.425551.070-AU-UM rev. 4
20.08.2020 Page 17 of 22
You can also see the address(es) occupied by every radio device:
Loop
address(es)
9,136
Configuration
Maintenance
Loop
Radio
Start Adrr
WL8-TRH
v x.x/RF v.y
A7
000wl8-trh
001wl8-trh(e)
002wl8-ov
etc.
001wl8-o
Edit
Delete
Info
Init
--ADD NEW--
2-in-1 devices that combine fire detectors and sounders (for example, EK-
WL8-OS, EK-WL8-HS, EK-WL8-OV etc.) occupy two addresses in a loop
and besides second address has increment 127 in comparison with first ad-
dress.
When you add a new wireless device, it is added at the end of the list by de-
fault.
When you delete a wireless device, the list shifted up automatically.
Example of wireless device deleting:
Radio
address
Radio Device Loop address
before deleting
Loop address
after deleting
000 WL8-TRH 007 007
001 WL8-O 008 008
002 WL8-OV
009 -
136 -
003 WL8-IN 010 009
001 WL8-TRH(E) Unknown Unknown
etc. etc. etc.
NOTE WL8-TRH(E) radio address will be equal some child device address.
It's not a mistake. Radio address space for expanders is differ from other
child devices address space.
PARAMETER EDITING
The basic parameters of the child devices have an obvious perception with a
corresponding choice of value (like On/Off). Some parameters are not obvi-
ous, for example EK-WL8-TRH parameters.
O
N / OFF